| |
|
|
1. Before any application, ensure the areas marked ‘A’ have been masked over with tape to avoid marking the brickwork, as these areas
will have the render removed.
2. Form the return corner using a
timber
batten.
3.Position a temporary former.
4.Apply a key coat of the Parex render
mixed
with the 751 LANKOLATEX and
then apply
the render to the required
thickness for the
quoin feature being
created.
5. When the render is semi-hard, mark
out
the quoins with a template and/or
spirit level.
6. Depending on the required design,
form the horizontal and vertical cuts
(ensure there is a minimum of 15 mm
of render after creating the cut
features).
7. Carefully cut and remove waste
areas ‘B’ |
Quoins |
|
| Note: The same application process can be used on blockwork without the need for
procedures 1 & 4 and a different colour render can be applied directly next to the quoins
feature without the need for the first render to dry. This application is called wet on wet
and is an excellent way of avoiding the need for using beads. For more information
consult Parex. To create feature band around windows use the same techniques. |
|
|
|
